SurfaceType

Used to determine how a surface should be displayed on a part and how automatic surface joints should behave.

Deprecated: SurfaceType joining is deprecated, leaving only visual changes on the affected Part. It should not be used for future work.

Items

Name	Value	Description
Smooth	0	Adds no details on the surface.
Glue	1	Adds an "X" pattern across the surface.
Weld	2	Adds an "X" pattern across the surface.
Studs	3	Adds square studs across the surface.
Inlet	4	Adds square holes across the surface where studs would be.
Universal	5	Adds a checker pattern to the surface using studs and inlets.
Hinge	6	Adds a yellow hinge to the surface. Parts touching it stick to the surface, allowing for rotations using physics. This should not be used for future work and existing instances should be replaced with a `HingeConstraint`.
Motor	7	Functioned identically to a hinge with the addition of a grey ring.
SteppingMotor	8	Functioned identically to a motor. It may have functioned differently in the past, but that functionality is non-existent.
SmoothNoOutlines	10	Previously similar to Smooth with outlines but no longer relevant since outlines have been removed.

Smooth

Adds no details on the surface.

Field	Value
value	0

Glue

Adds an "X" pattern across the surface.

Field	Value
value	1

Weld

Adds an "X" pattern across the surface.

Field	Value
value	2

Studs

Adds square studs across the surface.

Field	Value
value	3

Inlet

Adds square holes across the surface where studs would be.

Field	Value
value	4

Universal

Adds a checker pattern to the surface using studs and inlets.

Field	Value
value	5

Hinge

Adds a yellow hinge to the surface. Parts touching it stick to the surface, allowing for rotations using physics. This should not be used for future work and existing instances should be replaced with a HingeConstraint.

Field	Value
value	6

Motor

Functioned identically to a hinge with the addition of a grey ring.

Field	Value
value	7

SteppingMotor

Functioned identically to a motor. It may have functioned differently in the past, but that functionality is non-existent.

Field	Value
value	8

SmoothNoOutlines

Previously similar to Smooth with outlines but no longer relevant since outlines have been removed.

Field	Value
value	10